Software prefetching for software pipelined loops

The paper investigates the interaction between software pipelining and different software prefetching techniques for VLIW machines. It is shown that processor stalls due to memory dependencies have a great impact into execution time. A novel heuristic is proposed and it is show to outperform previous proposals.Peer ReviewedPostprint (published version

Randomized cache placement for eliminating conflicts

Applications with regular patterns of memory access can experience high levels of cache conflict misses. In shared-memory multiprocessors conflict misses can be increased significantly by the data transpositions required for parallelization. Techniques such as blocking which are introduced within a single thread to improve locality, can result in yet more conflict misses. The tension between minimizing cache conflicts and the other transformations needed for efficient parallelization leads to complex optimization problems for parallelizing compilers. This paper shows how the introduction of a pseudorandom element into the cache index function can effectively eliminate repetitive conflict misses and produce a cache where miss ratio depends solely on working set behavior. We examine the impact of pseudorandom cache indexing on processor cycle times and present practical solutions to some of the major implementation issues for this type of cache. Our conclusions are supported by simulations of a superscalar out-of-order processor executing the SPEC95 benchmarks, as well as from cache simulations of individual loop kernels to illustrate specific effects. We present measurements of instructions committed per cycle (IPC) when comparing the performance of different cache architectures on whole-program benchmarks such as the SPEC95 suite.Peer ReviewedPostprint (published version

Efficient resources assignment schemes for clustered multithreaded processors

New feature sizes provide larger number of transistors per chip that architects could use in order to further exploit instruction level parallelism. However, these technologies bring also new challenges that complicate conventional monolithic processor designs. On the one hand, exploiting instruction level parallelism is leading us to diminishing returns and therefore exploiting other sources of parallelism like thread level parallelism is needed in order to keep raising performance with a reasonable hardware complexity. On the other hand, clustering architectures have been widely studied in order to reduce the inherent complexity of current monolithic processors. This paper studies the synergies and trade-offs between two concepts, clustering and simultaneous multithreading (SMT), in order to understand the reasons why conventional SMT resource assignment schemes are not so effective in clustered processors. These trade-offs are used to propose a novel resource assignment scheme that gets and average speed up of 17.6% versus Icount improving fairness in 24%.Peer ReviewedPostprint (published version

Frontend frequency-voltage adaptation for optimal energy-delay/sup 2/

In this paper, we present a clustered, multiple-clock domain (CMCD) microarchitecture that combines the benefits of both clustering and globally asynchronous locally synchronous (GALS) designs. We also present a mechanism for dynamically adapting the frequency and voltage of the frontend of the CMCD with the goal to optimize the energy-delay/sup 2/ product (ED2P). Our mechanism has minimal hardware cost, is entirely self-adjustable, does not depend on any thresholds, and achieves results close to optimal. We evaluate it on 16 SPEC 2000 applications and report 17.5% ED2P reduction on average (80% of the upper bound).Peer ReviewedPostprint (published version

SAMIE-LSQ: set-associative multiple-instruction entry load/store queue

The load/store queue (LSQ) is one of the most complex parts of contemporary processors. Its latency is critical for the processor performance and it is usually one of the processor hotspots. This paper presents a highly banked, set-associative, multiple-instruction entry LSQ (SAMIE-LSQ,) that achieves high performance with small energy requirements. The SAMIE-LSQ classifies the memory instructions (loads and stores) based on the address to be accessed, and groups those instructions accessing the same cache line in the same entry. Our approach relies on the fact that many in-flight memory instructions access the same cache lines. Each SAMIE-LSQ entry has space for several memory instructions accessing the same cache line. This arrangement has a number of advantages. First, it significantly reduces the address comparison activity needed for memory disambiguation since there are less addresses to be compared. It also reduces the activity in the data TLB, the cache tag and cache data arrays. This is achieved by caching the cache line location and address translation in the corresponding SAMIE-LSQ entry once the access of one of the instructions in an entry is performed, so instructions that share an entry can reuse the translation, avoid the tag check and get the data directly from the concrete cache way without checking the others. Besides, the delay of the proposed scheme is lower than that required by a conventional LSQ. We show that the SAMIE-LSQ saves 82% dynamic energy for the load/store queue, 42% for the LI data cache and 73% for the data TLB, with a negligible impact on performance (0.6%)Peer ReviewedPostprint (published version

Inherently workload-balanced clustered microarchitecture

The performance of clustered microarchitectures relies on steering schemes that try to find the best trade-off between workload balance and inter-cluster communication penalties. In previously proposed clustered processors, reducing communication penalties and balancing the workload are opposite targets, since improving one usually implies a detriment in the other. In this paper we propose a new clustered microarchitecture that can minimize communication penalties without compromising workload balance. The key idea is to arrange the clusters in a ring topology in such a way that results of one cluster can be forwarded to the neighbor cluster with a very short latency. In this way, minimizing communication penalties is favored when the producer of a value and its consumer are placed in adjacent clusters, which also favors workload balance. The proposed microarchitecture is shown to outperform a state-of-the-art clustered processor. For instance, for an 8-cluster configuration and just one fully pipelined unidirectional bus, 15% speedup is achieved on average for FP programs.Peer ReviewedPostprint (published version

A partial breadth-first execution model for prolog

MEM (Multipath Execution Model) is a novel model for the execution of Prolog programs which combines a depth-first and breadth-first exploration of the search tree. The breadth-first search allows more than one path of the SLD-tree to be explored at the same time. In this way, the computational cost of traversing the whole search tree associated to a program can be decreased because the MEM model reduces the overhead due to the execution of control instructions and also diminishes the number of unifications to be performed. This paper focuses on the description of the MEM model and its sequential implementation. Moreover, the MEM execution model can be implemented in order to exploit a new kind of parallelism, called path parallelism, which allows the parallel execution of unify operations related to simultaneously traversed pathsPeer ReviewedPostprint (published version

Low-complexity distributed issue queue

As technology evolves, power density significantly increases and cooling systems become more complex and expensive. The issue logic is one of the processor hotspots and, at the same time, its latency is crucial for the processor performance. We present a low-complexity FP issue logic (MB/spl I.bar/distr) that achieves high performance with small energy requirements. The MB/spl I.bar/distr scheme is based on classifying instructions and dispatching them into a set of queues depending on their data dependences. These instructions are selected for issuing based on an estimation of when their operands will be available, so the conventional wakeup activity is not required. Additionally, the functional units are distributed across the different queues. The energy required by the proposed scheme is substantially lower than that required by a conventional issue design, even if the latter has the ability of waking-up only unready operands. MB/spl I.bar/distr scheme reduces the energy-delay product by 35% and the energy-delay product by 18% with respect to a state-of-the-art approach.Peer ReviewedPostprint (published version

Exploiting path parallelism in logic programming

This paper presents a novel parallel implementation of Prolog. The system is based on Multipath, a novel execution model for Prolog that implements a partial breadth-first search of the SLD-tree. The paper focusses on the type of parallelism inherent to the execution model, which is called path parallelism. This is a particular case of data parallelism that can be efficiently exploited in a SPMD architecture. A SPMD architecture oriented to the Multipath execution model is presented. A simulator of such system has been developed and used to assess the performance of path parallelism. Performance figures show that path parallelism is effective for non-deterministic programs.Peer ReviewedPostprint (published version

Thread-spawning schemes for speculative multithreading

Speculative multithreading has been recently proposed to boost performance by means of exploiting thread-level parallelism in applications difficult to parallelize. The performance of these processors heavily depends on the partitioning policy used to split the program into threads. Previous work uses heuristics to spawn speculative threads based on easily-detectable program constructs such as loops or subroutines. In this work we propose a profile-based mechanism to divide programs into threads by searching for those parts of the code that have certain features that could benefit from potential thread-level parallelism. Our profile-based spawning scheme is evaluated on a Clustered Speculative Multithreaded Processor and results show large performance benefits. When the proposed spawning scheme is compared with traditional heuristics, we outperform them by almost 20%. When a realistic value predictor and a 8-cycle thread initialization penalty is considered, the performance difference between them is maintained. The speed-up over a single thread execution is higher than 5x for a 16-thread-unit processor and close to 2x for a 4-thread-unit processor.Peer ReviewedPostprint (published version